Endpin Jack with IntegratedPre Amp
and Soundhole Pickup
by Artec
Endpin Jack with Integrated Pre Amp
and SoundHole Pickup by

Here is the easiest and most affordable way yet to add an Active Preamp and Pickup to your acoustic guitar.
The EPP-MG from Artec is an endpin jack with a built in active preamp. The system runs off a 9 volt battery held in place by a battery clip mounted inside the guitar. All that is required for installation is the removal of your existing endpin, drilling the hole to enlarge it to 2.5mm. Tighten down the bolts, mount the battery clip. Install the MSP-50 into the soundhole and your done. No wiring is needed as the battery and pickup leads are hard wired to the EPP-MG.
Why pay twice as much for just the pickup from another company when you can get the Pre Amp and pickup for Half the price.
Click here to read a review of the MSP-50 Pickup
This is a new system in the original package.
|
Included with the system is the MSP-50 Sound Hole pickup. The MSP-50 is a single coil passive sound hole pickup which easily mounts to the sound hole by means of adjustable clamps which eliminates damage to the guitar. Simply insert the pickup in the sound hole and tighten the two adjustment screws. The MSP-50 also has adjustable pole pieces which allows you to control the string to string balance.
|

|
The battery holder with screws and an adhesive wire holder is also included.
If for any reason you are not happy with the product within 30 days of your purchase,
e-mail me and simply return for a full refund.
For specifications on each item you can visit the following links:
Artec EPP
MSP-50 SoundHole Pickup
Manufacturer: N/A
SKU: EPPMG