Edge CH

Acoustic Preamp with built in Chorus Effect

Acoustic Pre-Amp
with built in
Chorus Effect

The EDGE CH is an on board Pre Amp with a two way blender. There is no need for a foot pedal, extra cords
or power supplies with the EDGE CH. The effect and tone control is right there at your finger tips.

The EDGE series doesn't stop there with state of the art features.
The designers at Artec came up with the inventive idea of using a Double Inner Clamp system to make installation as easy as ever. By using the clamp system, installation can be done without the need of wood screws and the threat of splintered or non binding wood screws.

Click here for template and specifications

A new design innovation from Artec is the Flip Up Hood battery compartment.
Saving space and making battery changing easier than ever before.


Dimension : H 90, W 56 , D 42 (mm)



Included with the system is the PP Piezo pickup of your choice. PP 607 is standard
but the piezo of your choice can be substituted.
The PP-607 is comprised of four layers of materials unlike most Piezo pickups.
The main feature of the PP-607 is the use of individual Piezo ceramic sensors
which improves string to string balance.

The EDGE CH also features a phase switch for anti feedback. The phase switch will allow you to change your sound from a light, clean tone to a rich and warm tone. This system also has a very low battery drain rate, over 1000 hours of use. The unit is turned on when your guitar cable is plugged in.

Features:

- Rate control for effect
- Bass, Middle, Treble Controls
- Presence control
- Master Volume
- Phase switch
- Low Battery check LED
- Piezo input jack
- Instrument End pin / Strap holder jack
- Sound hole/Piezo Blend control

Contents :

• EDGE CH
  
• PP 607 Piezo (Or you choice)
• 1/4" Instrument End pin jack